junaid8686
Mohammed Junaid
B. E, Instrumentation Engineering
Email:[email protected]
Skype id :Eng.junaid_1
Phone: +97433962785.
Career Objective:
I want to pursue my career in a field where I can able to present my ideas and show my interest of work especially in Electrical Power System and Controls.
Qualification:
• B.E (4yrs full time) in Instrumentation Engineering from Muffakham Jah College of Engineering and Technology, Osmania University, Hyderabad, India, June 2013.
• Intermediate Examination (10+2) from Board of Intermediate (BIE), Hyderabad, March 2008.
• SSC (10th) from Board of Secondary Education, Hyderabad, March 2006.
Work experience :
Worked in AL MAJAL AL ARABI HOLDING as an ELECTRONICS AND INSTRUEMENTATION ENGINEER since 17 March 2014 to 30 March 2016.
• Worked in the Maintenance Project of PRINCE SAUD BIN JALWY HOSPITAL (250 Beds), Al Ahsa, Saudi Arabia.
Project: Maintenance and Repair of all Electrical, Mechanical, and Electronics system related to Transformers, RMU, Elevators, Generators, UPS, Boiler, RO Plant, Water treatment plant, H.V.A.C and BMS.
Responsibilities:
• Monitor and controlling Building Management System (BMS), Honeywell Trend control system (Trend supervisor 963).
• Maintenance, troubleshooting and repairing of IQ3Xcite modules, Trend control system.
• Precommissioning, testing and installation of Direct Digital Control (D.D.C) panels of trend control system.
• Commissioning, installation of Siemens S7-200 PLC, C.P.U 224XP.
• Maintenance of Auto Transfer Switch (ATS) 2500A, 4P + Bypass- Manual.
• Repairing and maintaining Variable frequency drives of motor, Altivar 61(55kw/ 75HP) Schneider Electric e.tc. Check conditions of motors.
• Repairing and maintenance of Air Handling Unit (A.H.U), York, Johnson Controls. Calibration, installation and commissioning of Temperature sensors, Differential pressure switches, and Pressure gauges, Damper, Actuators and Valves.
• Repairing and maintenance of Electric fire pump controller, Metron, 100 HP, 380 volts, 3phase 60Hz, Microprocessor based controller.
• Repairing and maintenance of Diesel engine fire pump controller, Metron FD4_J, 240 VAC, 60Hz, 7.5 Amps, 12Vdc, Microprocessor based controller.
• General maintenance of Elevators like Mitsubishi, Axel, Schindler.
• General maintenance of Reverse Osmosis plant and Boiler Plant. Calibration, installation and commissioning of Temperature sensors, Photocell (LDR), Level controller probes, Pressure gauges, and Valves.
• Repairing and maintenance of Simplex fire alarm system, Esser Honeywell IQ8 control.
Achievements:
• Implemented CBAHI (Saudi central board for accreditation of Health care institutions) or Hospital Accreditation program for Prince Saud Bin Jalawy Hospital (M.O.H).
• Commissioned the utilities, Building management system (BMS), Reverse Osmosis plant, HVAC system, Boiler plant, Waste water treatment plant and Fire fighting system.
Worked in HK Innovations Pvt Ltd, as an Automation Engineer, Hyderabad, and A.P. Since July 2013 to February 2014.
Responsibilities:
• Programming PLC like Allen Bradly, Siemens, Gefaunac, Schneider and Omron.
• Programming SCADA software like In touch, RSView.
• Working and Configuration of PLC with field devices and HMI.
• Programming of Function Block Diagram like Siemens.
• Configuration of PLC’s inputs such as Proximity Photo Switch, Sensors, etc.
• Able to read the Technical Data and Specification of the Instrument.
• Solving and detecting faults in Electronic, Electrical & Non-Electrical Measuring Instruments.
Technical and Professional Training:
• Trained about 30 days in electronic corporation of India limited (ECIL) on automation (PLC & SCADA).
• Had done Diploma in Industrial Automation from HK Innovations Pvt Ltd, Hyderabad.
Technical Skills:
• Knowledge of programming PLC like Allen Badly, Siemens, Gefaunac, Schneider and Omron.
• Knowledge of programming SCADA software like In touch, RSView.
• Knowledge of working and Configuration of PLC with field devices and HMI.
• Knowledge of designing structures and objects in AUTOCAD.
• Programming of Function Block Diagram like Siemens.
• Knowledge of controlling and monitoring Building Management System (BMS).
• Knowledge of programming MATLAB software.
• Have knowledge of designing circuits by MULTISIM software.
• I am good in MICROPROCESSOR & MICROCONTROLLER programming and basics of C&C++ which will benefit your company.
• Configuration of Signal & Functional Modules.
• Project Management.
• Configuration of PLC’s inputs such as Proximity Photo Switch, Sensors, etc.
• Able to read the Technical Data and Specification of the Instrument.
• Solving and detecting faults in Electronic, Electrical & Non-Electrical Measuring Instruments.
• Having a good knowledge of automation and control, which make me eligible.
Academic Projects and Seminar
• Project Name : Development of PLC logic and SCADA for Substation Automation in Durgapur Steel Plant India.
• Technologies Used : Allen Bradly PLC, INTOUCH SCADA, Modbus serial protocol.
• Total Team Members : Three
• Description : In this project “ DEVELOPMENT OF PLC LOGIC FOR AUTOMATION OF DSP (DURGAPUR STEEL PLANT) SUBSTATION” , logic programs has been developed to automatically operate electrical feeders of the electrical substation remotely and interfacing of Multifunction meters and Numerical relays using Modbus serial RS232 protocol shall be carried out in order to monitor various electrical parameters such as phase to phase Voltage, phase to neutral voltage, power factor, frequency, current, Reactive power, apparent power, cumulative energy, maximum demand etc.
Computer Skills:
Operating Systems : Windows XP, 2007
Packages/Tools : MS Office 2003/07
Personal Profile:
Passport Number : K3702059
Nationality : Indian
Visa Status : 3 Months visit visa
Visa Number : 362016153842
Marital Status : Single
Languages : English, Arabic.
Current Location : Qatar
