Mohammad Rizwan Ali

Mohammad Rizwan Ali

Member since: October 2014
Send a Message
Timeline
About

USMAN

Email: [email protected]

Mobile.974-77156110

Transferable Visa ( NOC)

 

Objective:

 

To secure a good position in an environment which provides opportunities to fully utilize my knowledge and education in congenial atmosphere, which will allow for continued professional growth, offering an environment in which advancement is based on strength of individual contributions to the realization of organizational goals.

 

Experience:

 

01.I am working as Electrical Engineer (FACILITY ENGINEER ) MOSANADA  FMS QATAR  (  Al Thumama Stadium )Supreme Committee for Delivery & Legacy - اللجنة العليا للمشاريع والإرثin Doha,. From 14- FEB -2021 to till now.

 

01.I am worked as Electrical Engineer( Technical Officer )in QD­­­-OM in Doha, Qatar.Hamad International Airport, Midfield Area . Qatar. From 28-02-2013 to 08-FEB-2021.

           

02. I worked as Shift Incharge Electrical in NISHAT CHUNIAN (Dyeing & Printing) 4KM Rewind Manga Road LHR , From 15-04-2010 to 16.06.2012.

 

Work Description:

 

Operation and Maintenance of all electrical system in Al Thumama stadium ,Energy Center Building and Site office

Coordinating With Supremecommittee Team for preparation of stadiumas  per FIFA international lmatchschedule
 FM costing, budgeting and estimations of modification and renovation works.
* Asset Management.
* Conducting FM performance audits.
* Condition reports, Incident report, Handover report for assets and facilities.
* CAFM (Computer Aided Facilities Management System).
* Expert in snagging of MEP assets.
* Sound knowledge in Control, Security, Fire and Safety system operation and maintenance.
* Building Handover procedures.
* Estimation and costing for Fit-Out, renovation and other FM contracts.
* Well versed with NFPA building codes and standards. Responsible for Handover and takeover Electrical related all project document Monitor and Audit the Testing and Commissioning process of all electrical equipment through BIM360

·         Handled snagging and De-snagging process for Rooms and Equipment of stadium viaBIM360

·         Monitor and Auditing the PPM and CM Task, RFQ through CAFM day by day Operation and Maintain The FOP, Façade, Internal and External Lighting Fixtures and control system

·         Operation and Maintain The 11 KV Transformers, Generator, UPS (200 KVA ,100 KVA , 15 KVA , 10 KVA) , CBS, Hook Up Panel, MV panel, LV Panel, SMDB, DB, MCC panel, LCP and VFD ,Generators , Earthing & Lightning system ,Fire pump and Low voltage pump  system Supporting Match Event Team and Maintain all electrical system normal condition.

·         Participate in development of the Equipment Strategies, RCFA studies, Risk Screening/FRA , and technical requirement in outlined proposed technical task.

·         Ensure close collaboration with stadium / airport maintenance, workshop, engineering and project management dept. for the timely close out of outstanding maintenance activities and the process review and development of maintenance procedures.

·         Perform technical evaluation of material initiated for procurement including routine, non-routine and shutdown activities in order to ensure availability of right quality and specification of the material on time.

·         ApplyingLOApasstoKahramaaofficegetSubstationaccessforMEPsystemPPMtaskactivity

·         Monthly and Weekly Submitting Energy consumption report

·         Handling sub-contractors to perform the CM and PPM Task activity day to day operation

·         Co-ordinate with Comprehensive AMC and Non- Comprehensive AMC service providers for regular & breakdown maintenance activities.

·         Responsible for the planning, scheduling and coordination of all plan able maintenance work performed as per assigned venues.

·         Responsible to find faults, carries out repairs and maintenance, and services and tests HVAC units and Mechanical systems (Pumps, Firefighting pumps, Chiller, Heat Exchanger.

·         Assist in PPM completion of ELV systems as well, Likewise (CCTV, Fire Alarm, PAVA, Sound, , BMS, Turnstile and Access Control System).

·         Prepare and generation of PPM, CM, Energy Report & Sustainability Report.

·         Generate, collate and submission of weekly and monthly reports.

·         Assist in the Operational execution according to the Contract Documents.

·         Coordinate with other team and ensure the site clearance is available for specified activities.

·         Well dexterous in Asset Capturing/Asset Conditional Reports/Job Plan preparation/Asset BOQ list preparation for Tender documents.

·         Prepare BOQ/RFQ, Site Instruction as per request from higher Management.

·         Assist the Commissioning Team in Pre-commissioning & Commissioning stages of all   ELECTRICAL Equipment’s. Participate in establishing a demand plan for the contracts activities and contribute in establishing the scope of work for the complex contracts for Electrical Maintenance activities including post contract award process to ensure the compliance of business procedure.

·         Review and monitor the obsolescence of electrical spares and equipment to ensure business continuity and minimize operational risk.

·         Understand and Implement all required procedure for Electrical maintenance activities to ensure the compliance of the maintenance requirement and standard.

·         Participate in the Electrical System Audit and maintenance quality verification program for the department to meet with the outlined procedural requirement and safe operation of system.

·         Understand and utilizes the relevant management control systems to ensure the compliance of the business system

·         ReportingtoSeniorMEPmanager

 

QD­­­-OMI am worked as Electrical (power) Engineer at Hamad International Airport Dohawith QD-OM(Qatari Diar-O&M) Operation & Maintenance group in Doha Qatar. During my working period with QD-OM  my job responsibilities are,

 

·                  Prepare Documentations of Preventive Maintenance and Corrective Maintenance.&assign and supervise daily activities such as preventive maintenance audits and improvement works.

·                  Prepare daily and monthly report for actual power consumptions of various equipment’s all 11 KV Substation Airside and Land Side.

·                  Documentation work down for electrical related equipment’s history card, facility record, breaks down analysis.

·                  Planning and Executive of preventive breakdown and periodical maintenance for all kind of electrical equipment’s.

·                  Identifying areas for breakdowns and taking steps to rectify the equipment’s troubleshooting tools like root cause analysis.

·                  Leading & monitoring the performance of team members to ensure efficiency in operations and meeting of individual & group targets.

·                  Identifying and implementing the issues and spirit of cooperation between team members and FM.

·                  Co Ordination with our Client, End users, vendors, LOTO and store department.

·                  Condition Monitoring 11 KV Substation &infrared Thermography and partial discharge measurement

·                  To prepare technical reports, test sheets, failure report I co-ordination with client and other team members.

·                  I keep updated technical information of electrical assets all the time

·                  Having sound experience on MV switchgears, Distribution Transformers (oil and dry),

 

Training:

 

1.      Thermography Training Attendance

2.          Diploma from SWEDEN. ICT Center (Level 1)

3.          Electrical Safety Training in Kahramaa & Visit NCC &DGCC in Qatar

4.          BLS Training From QATAR

5.          Fire Training From   QATAR

6.          Partial Discharge Testing

7.          CAFM Training

 

Professional Training:

 

·                  SOP Training of 66kV GIS AREVA by HIA

·                  LOTO.

·                  SEFETY INDUCTION by G4S.                     

·                  11kV VCB ABB by HIA

·                  11kV VCB ABB by HIA

·                  11kV VCB Siemens by HIA

·                  0.415kV ACB ABB by HIA

·                  11kV VCB ABB by HIA

·                  11kV distribution and Protection System

·                  Black out Test and System Response.

·                  Personal protective equipment Training.

·                  50/60 MVA 66kV/11kV Power Transformer (HYNDAI) Training.

·                  11kV/.415kV Earthing Transformer Training.

·                  11kV/.415kV, 2000kVA Dry Type Distribution Transformer (AREVA) Training.

·                  11kV/.415kV, 1000kVA Oil Type Distribution   Transformer (AREVA) Training

 

Complete In charge and responsible for all activities:

 

·                  Substation Incharge.

·                  Drafted EOP For power system failure

·                  Drafted Standard Operating Procedures for Operations and Preventive Maintenance

·                  Check list of Following Electrical Equipment’s.

·                  11KV Main Bus Bar and Switchgear.

·                  11KV Loop and Distribution Transformers.

·                  66 KV GIS Operations.

·                  66/11 KV Power Transformer Operations.

·                  Tap Changing of Transformer.

·                  11/0.415 KV Distribution Transformers.

·                  Testing 11KV Switchgear (Siemens) Insulation Test .Contact Resistance Test

·                  Un-interruptible Power Supply.

·                  Battery Charger operations.

·                  110VDC Switchgear Operation.

·                  Earth Pit Checking.

·                  Operation & Maintenance of Main 11kVSubstation.

·                  Power Transformer, Under Ground Cable, Reactor

·                  Operation & Maintenance of 11kV Remote Substation.  

·                  Partial Discharge Testing of 11KV Switchgears & 11kv Transformers and         Power cable.

·                  MV Switchgear (Siemens)

·                  Distribution Transformer Dry Type(AEVA)

·                  Low Voltage Switch Gear (Siemens)

·                  MCC, VFD (Siemens)

·                  10kVA UPS (CLORIDE)

·                  LV  Distribution Board (ABB)

·                  110V Battery Charger, Batteries and Distribution Board

·                  30V Battery Charger, Batteries and Distribution Board

·                  Working on 6.6 KV Switchgear & 6.6 KV VFD

·                  Electrical Fire Water Pump 400 HP& Diesel fire pump Master Control panel

·                  Partial Discharge Testing and Thermography test perform in 11 KV Switchgears and 11/415 Transformer.

·                  Managing Overall Maintenance Data and Preparing the Formats for the Operation and Maintenance of Plant.

·                  Downloading the parameter of VFD.

·                  Working on 50/60 MVA Transformers ABB&2000 KVA AREVIA and Schiender Electric.

·                  Maintenance of Electrical System LV & HV Switchgear.

·                  To working PLC System Siemens Sematic S7& ABB &.Allan Bradly.

·                  11 KV & 415 VOLT Switch Gear & Control System SIEMENS & ABB.

·                  Protection system.

·                  Working on 66kv & 11kv &415 Volt Supply.

·                  Working of ACB, VCB, MCCB, Magnetic Contactors & Protection Relays etc.

·                  Errection of Finishing Stenter China& Printing machine & CRU ,SRU Plant.

·                  Working in dyeing & printing fabric machines and Troubleshooting.

·                  Erection of Monforts & Kusters Machine

·                  Erected steam boiler of DDFC international, Germany (1*10 tons).

·                  Demand as per side and work on the side as per

·                  Drawing and understand the Construction of Electrical Drawing.

·                  Understand The Single phase and three phase wiring

·                  Drawing and Single Line drawing HT Panel and LT Switchgear.

·                  Understand all Electrical circuit like DOL Reverious

·                  Forward Circuit, Star Delda circuit, and control circuit.

·                  Calculate and Find the Rating of Electrical Equipment like circuit, Motor, Transformer.

·                  Testing the AC Motor and maintenance (1HP – 400HP), Master Fire Pump    Controller.

·                   

 

AREA OF EXPERTISE:

 

·         Operations & Maintenance of facilities

 

·         Industrial operation & Maintenance

 

·         Engineering Procurement

 

·         Engineering Management

 

·         Stores & Spare parts management.

 

·         Manpower planning & management

 

·         Third party/Subcontract Management

 

·         Maintenance performance strategies

 

·         Documents & Drawings management

 

·         Trouble shooting of equipment’s

 

·         Skilled manpower evaluation & grooming

POTABLE AND FIRE WATER PUMPS

·      Operation and maintenance of electric driven potable and fire water pumps.

 

·      Operation and maintenance of diesel driven potable and fire water pumps

 

·      Managing all maintenance activities during PM or CM

 

·      Ensured work safety procedures during maintenance activities

 

 

·      Replacement of any defective parts during PM or CM activity

 

MATERIAL PRS, POs, FOLLOWUP, STORE, ISSUANCE & DELIVERY TO SITE.

 

·      Preparing purchase requests

 

·      Follow up the PRs & POs,

 

·      Communicating with suppliers

 

·      Inspection and confirmation of delivered parts as per PO.

 

·      Maintaining inventory stock in coordination with store

 

·      Communicating with store for inventory control

 

·      Material issuance from store to site during maintenance activities

 

·      Purchasing technical part or material any emergency corrective maintenance

 

·      Counter check and confirmation of item material, & parts maximum & minimum level in store

 

·      Keeping Up to date weekly PRs, POs, KPI  reports.

 

Academic Qualification:

 

1.          Bachelor of Technology in Electrical Engineering (2006 To 2010).

2.          DAE (Electrical Engineering) 2006 P.B.T.E,

3.          Thermography Training Attendance

4.          Diploma from SWEDEN. ICT Center (Level 1) 2015

 

Personnel Information:

 

·                  Father Name:                          Masood Ahmad

·                  Date of Birth:                           14- 12- 1986

·                  Marital Status:                         Married

·                  Religion:                                  Islam

·                  Passport No.                           BF4159122  

·                  Driving License                       QATAR

Mobile.(QATAR)                     974-77156110

·                  Email.                                     [email protected]

 

 

 

Declaration:

 

I hereby declare that all the information above said is true to the best of my knowledge and belief.

 

 

PLACE: QATAR                                                        USMAN

 

 

No No
Posted Ads

Mohammad Rizwan Ali hasn't posted anything yet.