CCTV system
By [email protected] •
Hi Everyone,
We are installing camera and we've encounter a problem in our project that our DVR every time we need to eject the Disk the DVR is always system reboot. but when we tried here in our lab. the faulty DVR, it's working normal and I didn't encounter any problem from our system.
The voltage in our project is 237VAC and here in our lab is 244VAC.
Please give us advice or any information for the possible reason why we encountered this problem.
Thanks
the voltage u said is tolerable if, u your supply voltage is 240V, check what is exactly your rated supply voltage.
Possibility1: The power is unstable.
Solution: Please use a voltage regulator.
possibility2: There was something wrong with the camera or the HDD.
Solution: Get rid of all cameras and the HDD