1: Condemn the pre-existing hose and regulator assembly from your grill by --- cutting off the black hose on the BBQ grill fitting, take note: it is the opposite end of your pre-installed hose of the regulator(with black knob, aluminum color) assembly. Keep this assembly, you might use this upon return to USA.
2: Prepare the BBQ inlet fitting clean and free.
3: Insert the green hose(image 1) with hose clamp in each end. Fix the other end of the green hose on the BBQ inlet fitting and tighten with screw driver. On the other end, do the same to insert on the gray colored regulator(painted) fitting and tighten again with screw.
4: Attached the grey colored regulator to the propane tank outlet.
5. Prepare a dishwashing liquid mix with little water, 50:50 ratio.
6: Slightly open the grey regulator control valve.
7: Turn on the BBQ grill flame.
8: dripped the dishwashing liquid mix around both clamped hose ends and check bubbles for leakages.
9: if it doesnt flame, pour petrol over and lit a light...
10: dont follow step no. 9... only up to no 8 are all true.
ok.... here are the things u must have before making all these work...
1: hose clamp, 2pcs
2: flat/philipp screw driver
3: sharp cutter
PROCEDURE:
1: Condemn the pre-existing hose and regulator assembly from your grill by --- cutting off the black hose on the BBQ grill fitting, take note: it is the opposite end of your pre-installed hose of the regulator(with black knob, aluminum color) assembly. Keep this assembly, you might use this upon return to USA.
2: Prepare the BBQ inlet fitting clean and free.
3: Insert the green hose(image 1) with hose clamp in each end. Fix the other end of the green hose on the BBQ inlet fitting and tighten with screw driver. On the other end, do the same to insert on the gray colored regulator(painted) fitting and tighten again with screw.
4: Attached the grey colored regulator to the propane tank outlet.
5. Prepare a dishwashing liquid mix with little water, 50:50 ratio.
6: Slightly open the grey regulator control valve.
7: Turn on the BBQ grill flame.
8: dripped the dishwashing liquid mix around both clamped hose ends and check bubbles for leakages.
9: if it doesnt flame, pour petrol over and lit a light...
10: dont follow step no. 9... only up to no 8 are all true.
GOOD LUCK...
"Shortly