Muscatali:

The linksys that I have is configured by:

http://192.168.1.1

Then enter admin for the user name and admin in the password field.

My router setup looks like this:

Encapsulation: RFC2364 PPPoA
Multiplexing: VC
QOS: UBR
Autodetect: enabled
Virtual Circuit: 8 VPI , 35 VCI
DSL Modulation: Multimode

Of course there are other settings, but these get you started.

I have noticed the sometimes you MUST shut everything OFF and wait awhile, then turn it all back ON. The computer, the router, etc.

One question that I have for you, so it is not overlooked. Is your Linksys plugged directly into the phone jack with no other devices between? That is the way mine is setup.

Good luck.

I still may try PPPoE just to see if it works.......