Timeline
OSCARSCHINDLER
Member since: July 2016
Timeline
About
PROFESSIONAL SUMMARY: 8+ Years of Experience in mechanical engineer involved in Construction, maintenance and operation, including plumbing, piping and sprinkler system design. Expert Witness since 2007 specializing in plumbing installation, hot water scalding, water heaters, gas appliances and equipment, gas explosions, construction defects, and failure analysis involving mechanical equipment and plumbing/fire fighting components. • Sphere headed experience in Construction of Piping (UG/AG piping, RTR, Fire piping) & Plumbing • Worked with Quality Control procedures and Standard Quality Plan as per ASME,NFPA, IBR, SAMSUNG ,ARAMCO & BECHTEL Standards • Strong knowledge on Tools & Material. • Effective Commitment and Communication. EDUCATION QUALIFICATION: B.E., MECHANICAL ENGINEERING, Anna University. TECHNICAL COURSE: • NDT Level-II (LPT, MT, UT & RT), SIS Inspection Services. • Completed in plant Training in BHEL for P91, 93 materials. • Completed the training in RTR(for sewage, utility& process line) TECHNICAL & NON TECHNICAL SOFTWARES: • AUTO-CAD • MS OFFICE CONFERENCES & SYMPOSIUMS: FAB91/P91 IN BHEL/IIM TRICHY RELEVANT EXPERIENCE :( SAUDI ARABIA) Company : OTHMAN SALAH AL-GHAMDI EST.(OSG) Client : SAUDI ARABIAN OIL COMPANY(ARAMCO) EPCM : Othman Salah Al-Ghamdi Est.(OSG) Project : REPLACE OME BUILDING @ YCOT Position : MEP- PIPING ENGINEER (Plumbing & Fire fighting) Duration : JULY. 2014 – SEPTEMBER-2015 Job Responsibilities: • Reviewing design drawings including Piping& Fire Fighting Plan Layout, Isometric. • Revising isometric and plan drawing as per construction requirement. • Installation supervision of Drainage system/G manholes, Neutralization tanks Plumbing Fixtures both inside & outside building. • Installation supervision of Fire fighting pipes, Fire Hydrants, sprinklers, & hose reel cabinets. • Fitup, welding, hydro leakage test inspection. • All the documents such as Method of statement, Inspection test plan and Job safety analysis are developed as per ARAMCO STANDARD Standards. • Providing 2 week look ahead schedule to INSPECTION department. • Following up of all the Quality and Safety management policies such as Job Safety Analysis, Start Card, Method Statement and Inspection Test packages. • Identify punch list in all aspects of piping/ Firefighting construction and clearing it at the earliest. • Review of Level of inspections for assigned materials as per the standards and followed accordingly. • Preparing and reviewing of Installation Procedure &test package according to the project requirements. • Reviewing the calibration certificates for Hydro Test equipments and Conducting as per Saudi Aramco SATIP & SAIC. RELEVANT EXPERIENCE :( SAUDI ARABIA) SHUT DOWN Company : OTHMAN SALAH AL-GHAMDI EST.(OSG) Client : YANBU ARAMCO SINOPEC REFINERY LTD (YESREF) EPCM : ABV ROCKS GROUP Project : MC5 BUILDING PACKAGE Position : MEP SITE ENGINEER (PLUMBING & Fire fighting) Duration : JAN. 2014 – JUNE-2014 Job Responsibilities: • Reviewing design drawings including Piping Plan Layout, Isometric, and Weld map. • Revising isometric and plan drawing as per construction requirement. • Installation of U/G RTR pipes for firefighting external works using RTR techniques Taper –taper joints, Key lock joints • Providing material request and raising Request for Quotations to vendors and hence coordinating with the Material Management for the arrival of materials and certificates. • Proposing Work Order to start the work. • Inspection coordination for all the piping fit-ups and welding. • fit up , welding, hydro leakage test inspection. • All the documents such as Method of statement, Inspection test plan and Job safety analysis are developed as per YASREF Standards. • Providing 3 week look ahead schedule to planning department. • Following up of all the Quality and Safety management policies such as Job Safety Analysis, Start Card, Method Statement and Inspection Test packages. • Expediting over all progress in piping construction including Above Ground, Under Ground, and Firefighting. • Coordinating with the civil personal for excavation of Under Ground Piping. • Coordinating with survive for excavation and installation of pipes. • Identify punch list in all aspects of piping construction and clearing it at the earliest. • Attending meeting with the subcontract companies and verifying progress report in Piping Construction. • Attending Weekly management meeting with the project manager and submitting the progress report in Piping. RELEVANT EXPERIENCE :( SAUDI ARABIA-1.5YR) Company : OTHMAN SALAH AL-GHAMDI EST.(OSG) Client : MADEEN SAUDI ARABIA/SAMSUNG ENGINEERING LTD. EPCM : BECHTEL/PANGULF Project : Madeen Aluminum Smelter Position : PLUMBING& FF ENGINEER(AG/UG/HOTWATER/FIREPIPING) Duration : JUNE. 2012 – DEC-2013 Job Responsibilities: Responsible for install, repair and maintain plumbing systems and fixtures in residential, commercial, institutional, industrial or public buildings. Ensuring were possible work is completed on the first visit and to the appropriate service standard. • Reviewing design drawings including Piping& Fire Fighting Plan Layout, Isometric, and Weld map. • Revising isometric and plan drawing as per construction requirement. • Construction planning and supervision of Firefighting and PIPING work at cast house site. • Installation and maintenance of domestic hot and cold water systems. • Finding the route cause of a wet plumbing problem and fixing it. • Preparing written work cost estimates and negotiating contracts with clients. • Solvent welding of ABS and PVC pipe work. • Completing installation reports, service sheets and other administrative records. • Installing copper and iron pipe work linking boilers & heat exchangers. • Removing existing heating systems / radiators & replacing with combi systems. • Servicing gas boilers and carrying out gas repairs. • Cutting openings in structures to accommodate pipes and pipe fittings. • Measuring, cutting, threading, and bending pipes to required lengths and angles. • Preparing complex calculations and planning for large jobs. • Installing flue systems and wiring them p to programmers, zone valves etc. • Accurate completion of Time sheets and Work & Materials records. • Installing & maintaining under-floor heating systems & controls. • Refurbishment work to bathrooms and kitchens. • Providing material request and raising Request for Quotations to vendors and hence coordinating with the Material Management for the arrival of materials and certificates. • Proposing Work Order to start the work. • Inspection coordination for all the piping fit-ups and welding. • Fit up, welding, hydro leakage test inspection. • All the documents such as Method of statement, Inspection test plan and Job safety analysis are developed as per BECHTEL Standards. • Providing 3 week look ahead schedule to planning department. • Following up of all the Quality and Safety management policies such as Job Safety Analysis, Start Card, Method Statement and Inspection Test packages. • Expediting over all progress in piping construction including Above Ground, Under Ground, and Firefighting. • Coordinating with the civil personal for excavation of Under Ground Piping. • Daily Manpower list update and weekly progress report will be submitted to the Manager. • Identify punch list in all aspects of piping/ Firefighting construction and clearing it at the earliest. • Attending meeting with the subcontract companies and verifying progress report in Piping Construction. • Attending Weekly management meeting with the project manager and submitting the progress report in Piping. Company : PIPELINESAND PROCESS EQUIPMENTS (P)-LTD TRICHY INDIA (2YRS) Client :BHEL Project :WATER TRANSMISSION LINE FROM HIGH PRESSURE BOILER. Position :PIPING/WELDING ENGINEER Duration :DEC. 2010 – MAY 2012 Job Responsibilities: • Assist in preparation of bulk MTO data for estimating purpose by using information and data from P&ID. • PR package review as per ASME, ASTM, and with other BHEL Engineering Standards • Preparation of Material requisitions prior to approval of PR package from BECHTEL. • Review of Level of inspections for assigned materials as per the standards and followed accordingly. • Technical Appraisal for the received quotations from the sellers. • Raising Technical Queries to the client. • Attending weekly meetings with client, subcontractors and vendors. • Expediting engineering and inspection activities for all materials and equipment’s received for construction. • Reviewing and coordinating all site activities including Quality control (Welding Summary, NDT Reports and Hydro Test Reports) and Construction to expedite things. • Had sufficient hand on preparation of Inspection Test Packages for hydro test. • Site visit for verification of available materials and construction progress. Company :SIEVERT INDIA (P)-LTD (1YR) Client :HPCL (HINDUSTAN PETROLEUM REFINARY-MUMBAI. Project :REPLACEMENT OF CORRODED CRUDE OIL LINE Position :PIPING ENGINEER Duration : NOV. 2009 – NOV 2010 Job Responsibilities: • To carry out raw materials (Pipes, Plates & Blanks) inspections (UT, PT & LPT). • Heat treatment movement sheet generation & monitoring the activity carried out. • Inspecting formed and machined fittings (Elbow, Tee, Reducer), Shell and Dish Ends. • Generating forming and machining history card after completing the above quality control activities. • Performing inspection for the formed Pressure Vessel drums such as hardness test and percentage of ovality, thinning and actual flow area. • Witnessing the hydro test of the manufactured fittings and pressure vessels in shop and on site. • Have sufficient knowledge in handling measuring instruments like D-meter, Spectrometer, OD & ID gauges. • Inspections walk down for construction of piping system, tank and pressure vessels in site. • All the QC activities are carried out as per QCP and SQP, follow up activities are update in SAP. • Submitting daily inspection report to the manager stating the clearance and failures details. • Reviewing PQR and WPS reports for errors. • Visiting sub-contractors site for raw materials inspection and production inspections. Company : HARIHAR ALLOYS AND CASTINGS LTD (2YRS) Client : NTPC/ NON NTPC. Position : PIPING/WELDING ENGINEER Duration : JUN 2007 – AUG 2009 Job Responsibilities: • Vendor coordination for MTC and other related QC documentations for approval. • Inspection for welding and fabrication works of tanks, coils and tie rods. • Welding and NDT reports are reviewed as per WPS requirements. • Heat Treatment movement sheet generation for welding and formed items. • Inspection of the materials is done as per IBR and ASME standards. • Shipping of materials after inspection is approved. PERSONAL DETAILS: Date of Birth : 10.01.1985 Gender : Male Languages Known : English, Tamil and Hindi. Fathers Name : RAJENDRAN.K Marital Status : Married Call / Message to : 30079335(QATAR) PASSPORT DETAILS PASSPORT NO : H7008402 DOE : 22/09/2019 (ARUN KUMAR RAJENDRAN)
