two routers

If Possible plz fix a appointment at ur convenient time and call me .i will config that..

i am sorry i went ho,e that's why couldn't answer it, i used the company phone when i called you. but actually i didn't fixed it i tried many option but i cant.

I tried to call u..Hope u got the solution....

If you need an immediate solution you can Message me on QL.

I can help you for free.

Please download the manual to configure the ap...

http://www.mediafire.com/?x66nr17n73nhvds

The thing you have to do to secure your WI-FI is to connect to q-tel router ans set password Maybe WEP/WPA/WPA2.Hope WPA2 is more Secure..

I am connected using the dlink adapter

So here it is..Ur using dlink usb dwa 125 rite.This is not a Router,an wireless Adapter to be used within LAP/DESK to connect to wireless Networks.

The thing u have to use is Wifi Repeater/Bridge to extend wireless signals from ground Floor to 1st Floor..Hope you got the answer...

It means you are connecting to qtel router using Wi-Fi and not LAN cable. Am I correct?

to setup dlink WAP, you have to connect your laptop to dlink WAP using a LAN cable as azarajez said.

But you have to check you router IP addy first, because usually WAP are automatically obtaining IP addy from router (default) so, the IP addy of dlink WAP changes.

i am connected both but this qtel is located on the ground floor so the signal is not good enough. we put extra router on the second floor.

Your connected to qtel router using LAN cable. Why do you need your dlink WAP for?

my pc have 2 connection the qtel which is showing lan and i am using dlink usb dwa 125. i tried before this ip add 192.168.0.1 but i cannot access, so meaning i need to do the first step u mentioned?

If u need to configure you have to connect with Straight cable to pc/Lap.Else if d-link is connected with your network type 192.168.0.1 in address bar.Else the 1 st one is the only way to do....

do i need still to connect the cable wire in the router or no need? can i do it direct here in my pc without using cable wire? or i will do what you said from the start?

Thanks...

Plz set ur PC Ip to dhcp.Ping 192.168.0.1...if u get reply then hit 192.168.0.1 in address bar..Username- admin,password-admin/none

my dlink model is D-Link AirPlus Xtreme G DWL-2100AP Wireless Access Point.

Hope you have to configure your LAN Adapter IP Address..Can u Just tell your D-Link Router Model.

thanks, but how to connect the dlink router in laptop? i tried before to use cable wire i connect it to laptop and to the router of dlink but still i cannot log into this ip add.

Just connect your D-Link router using a straight cable from one of its LAN port to your PC/Laptop.Just type 192.168.1.1 in ur address bar,asks for username/password.

Default may be admin/admin.

Plz Check.