Description

• Worked as a Site Electrical Engineer (Low and Medium Voltage) in PRIDE Electrical Contractors from 5th. January 2015– 6th. January2017.
• Completed Projects are:
  • Industrial constructions project, named SCHNEIDER ELECTRIC.
  • Residential project TEJ SADAN Apartments.
• Charged 33KV from underground cables by laying in cable trench and in Hume pipes.
• Conducted the Megger test for verifying the electrical insulation level and Earth Resistance Test for soil resistivity.
• Monitored the  installation and commissioning of
  • 33KV HT VCB switchgear(1250A,26.24kA,TP,HDO type),
  • 2MVA Transformers (33KV/415V ONAN with OLTC and RTCC panel)
  • 415Volts PMCC(4000A,150kA,TPN,EDO type ACB with Micro-processor)
  • 350KVAR APFCP (630A,1000kA,TPN,EDO type ACB with Micro-processor
  • 100KVA UPS (250A,35kA,TPN MCCB)
  • Sandwich type Outdoor bus duct(4000A,112kA,TPN with class-F insulation)
  • Lighting DB and UPS DB (4way, 6way, 8way, 12way)
  • Providing CI,GI,Cu earth station for all machinery equipments.
• All Internal Electrification works include
• Circuit wiring and control wiring based upon the phase distribution.
• Point wiring with switch  and MCB control for primary and secondary light point, two way switch point etc.
• Street lighting works for entrance and exit roads for building.
• Switch socket outlets with independent and dependent type.
• Cable trays, conduits, raceways and cable routing. for power and networking.
• Hands on experience in designing, planning, estimation and execution of Electrical activities.

 

• Certificate course in ELECTRICAL DESIGNING & DRAFTING for residential and commercial building loads at NSDC affiliated Dhanush Engg. Services Pvt. Ltd.
• AUTOCAD and DIALUX.
• MS-Office (Excel, Word and PowerPoint).

 

Training:

 

• Two months training of Electrical Building Services Design
• Project: COMMERCIAL BUILDING (1B+G006Floor).
  • Estimating Total connected load for a project (Electrical Load+HVAC Load+Plumbing load+Elevator+Escalator).
  • Segregation of estimated maximum demand into individual load centers.
  • Calculation of room index and Light fixtures required for area.
  • Balancing the Load Schedule using MS-Excel.
  • Selection of Transformer, DG Set and UPS ratings.
  • Short circuit current and voltage drop calculations at each level of distribution.
  • Selection of HT and LT switchgear based on full load current, fault current and tripping time.
  • Selection of HT and LT cables based on current carrying capacity and derating factor.
  • Design of Earthing and Lightning protection system, Selection of Capacitor bank and bus bar size.
  • Preparing B.O.Q according to the designed layout and material required.

Preparation of detailed Single Line schematic and all necessary drawings using AutoCAD software

Information